APMT1604PDER-ALU US2915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VATAPMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1604PDER-ALU / APMT160420-ALU / APKM160424-ALU US2915 Indexable Carbide Milling Insert (Sangeo) Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- US2915 Grade: Aluminium & Non-Ferrous
- Positive geometry
- Parallelogram shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
APMT1604PDER-RM PS5915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT160412-RM PS5915 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915, general machining of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style style carbide milling inserts
- PS5960 / PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
APMT1604PDER-RM PS5925 Indexable Carbide Milling Insert (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT160412-RM PS5915 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5925, general machining of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- PS5960 / PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
APMT1604PDER-RM PS7925 Indexable Carbide Milling Insert (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1604PDER-RM PS7925/PS7920 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+Al2O3+TiN layer on a P20-P30 substrate for very high toughness. The PS7925/PS7920, general machining of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- PS7915S / PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
AXMX High Feed HFM Mill Indexable Milling Inserts (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
AXMX070204R PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- AXMX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Parallelogram shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
BLGX High Feed HFM Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
BLGX0603R-M PS5925 high feed inserts for the Sangeo HFMD high feed milling system. The 4 corners, double-sided inserts and high speed/high feed machining achieve the ultimate productivity and efficiency. The insert’s high rake angle and helix design can achieve significantly reduced cutting resistance allowing the HFMD system to machine high speeds and feeds.
Sangeo BLGX high-feed milling inserts for use with HFMD Milling bodies
Unique insert geometry features a high rake angle and helix design
Ideal for high speed and high feed machining with low cutting resistance
Excellent clamping stability due to the unique clamping system and insert
pocket Increased stability helps minimise noise and vibration, thus giving an excellent surface finish.
No need to change the holder if you use the TaeguTec holder.
BLGX0603R-M PS5925 Indexable Indexable Carbide Milling Inserts. PS5925, feature a tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- BLGX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
BLGX0603R-M PS7925 High Feed HFM Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
BLGX high feed inserts for the Sangeo HFMD high feed milling system. The 4 corners, double-sided inserts and high speed/high feed machining achieve the ultimate productivity and efficiency. The insert’s high rake angle and helix design can achieve significantly reduced cutting resistance allowing the HFMD system to machine high speeds and feeds.
Sangeo BLGX high-feed milling inserts for use with HFMD Milling bodies
Unique insert geometry features a high rake angle and helix design
Ideal for high speed and high feed machining with low cutting resistance
Excellent clamping stability due to the unique clamping system and insert pocket
Increased stability helps minimise noise and vibration, thus giving an excellent surface finish.
No need to change the holder if you use the TaeguTec holder.
The BLGX0603R-M PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard-to-cut materials and stainless steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- BLGX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
BLGX0603R-MM PS5915 Indexable Carbide Milling Insert (Sangeo)
£7.00 exc. VAT10 pieces (Min. Order)
BLGX high feed inserts for the Sangeo HFMD high feed milling system. The 4 corners, double-sided inserts and high speed/high feed machining achieve the ultimate productivity and efficiency. The insert’s high rake angle and helix design can achieve significantly reduced cutting resistance allowing the HFMD system to machine high speeds and feeds.
Sangeo BLGX high-feed milling inserts for use with HFMD Milling bodies
Unique insert geometry features a high rake angle and helix design
Ideal for high speed and high feed machining with low cutting resistance
Excellent clamping stability due to the unique clamping system and insert pocket
Increased stability helps minimise noise and vibration, thus giving an excellent surface finish.
No need to change the holder if you use the TaeguTec holder.
The BLGX0603R-MM PS5915 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915 milling grade ideal for medium and roughing of steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- BLGX style carbide milling inserts
- PS5925 / PS5915 Grade: Stainless Steel
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
EPGX High Feed Milling Inserts (Sangeo)
£7.90 exc. VAT10 pieces (Min. Order)
EPGX060210R-SM PS5915 milling inserts for the Sangeo HF4 EPGX high-feed milling system. The HF4 High feed mill will improve productivity, and slash cycle with increased depth of cut. EPGX inserts have a high-cost efficiency with 4 cutting edges. Dedicated grades and chip breakers are available for steel, stainless steel, HRSA’s & cast iron.
EPGX inserts with 4 cutting edges.
High-feed milling inserts for the Sangeo HF4 mill.
High feed mill which will improve productivity, slash cycle with increased depth of cut.
High-cost efficiency with 4 cutting edges.
Dedicated grades & chip breakers for steel, stainless steel, HRSA’s & cast iron.
- EPGX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
EPGX060210R-SM PS7925 High Feed Milling Inserts (Sangeo)
£7.90 exc. VAT10 pieces (Min. Order)
EPGX milling inserts for the Sangeo HF4 EPGX high-feed milling system. The HF4 High feed mill will improve productivity, and slash cycle with increased depth of cut. EPGX inserts have a high-cost efficiency with 4 cutting edges. Dedicated grades and chip breakers are available for steel, stainless steel, HRSA’s & cast iron.
EPGX inserts with 4 cutting edges.
High-feed milling inserts for the Sangeo HF4 mill.
High feed mill which will improve productivity, slash cycle with increased depth of cut.
High-cost efficiency with 4 cutting edges.
Dedicated grades & chip breakers for steel, stainless steel, HRSA’s & cast iron.
The EPGX060210R-SM PS7925 High Feed Milling Inserts feature tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on an M20-M30 substrate for very high toughness. The PS7925 milling grade is ideal for medium and roughing of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- EPGX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
LNMX HFM Mill High Feed Indexable Milling Inserts (Sangeo)
£7.00 exc. VAT10 pieces (Min. Order)
LNMX0303SER-MJ PS5915 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915 milling grade is ideal for medium and roughing of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- LNMX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
LNMX0303SER-MJ PS7925 HFM Mill High Feed Indexable Milling Inserts (Sangeo)
£7.00 exc. VAT10 pieces (Min. Order)
LNMX0303SER-MJ PS7925 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard-to-cut materials and stainless steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- LNMX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
PNMU 45 Degree Rich Mill Indexable Milling Inserts (Sangeo)
£7.50 exc. VAT10 pieces (Min. Order)
PNMU0905XNER-MM PS5915 45 Degree Rich Mill Indexable Milling Inserts feature tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915 milling grade is ideal for medium and roughing of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- PNMU style style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Pentagon shape
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
PNMU0905XNER-MM PS7925 Indexable Carbide Milling Insert (Sangeo)
£7.50 exc. VAT10 pieces (Min. Order)
PNMU0905XNER-MM PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on a M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard to cut materials and stainless steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- PNMU style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Pentagon shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
RDHX1003M0 PS5925 Indexable Milling Insert (Sangeo)
£5.00 exc. VAT10 pieces (Min. Order)
RDHX1003M0 PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- RDHX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Round shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
RDHX1003M0 PS7925 Indexable Milling Insert (Sangeo)
£5.00 exc. VAT10 pieces (Min. Order)
RDHX1003M0 PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on a M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard to cut materials and stainless steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- RDHX style style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Round shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
RDHX12T3M0 PS5925 Indexable Milling Insert (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
RDHX12T3M0 PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- RDHX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Round shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
RDHX12T3M0 PS7925 Indexable Milling Insert (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
RDHX12T3M0 PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on a M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard to cut materials and stainless steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- RDHX style style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Round shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
SEET12T3-FM PS5925 Indexable Milling Insert (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
SEET12T3-FM PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SEET style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Square shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
SEHT12T3-CM US2915 Indexable Milling Insert (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
SEHT12T3-CM US2915 Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SEHT style carbide milling inserts
- US2915 Grade: Aluminium & Non-Ferrous
- Positive geometry
- Square shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
SEKN1504AFTN PS5960 Indexable Milling Insert (Sangeo)
£6.50 exc. VAT10 pieces (Min. Order)
SEKN1504AFTN PS5960 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+Al2O3+TiN layer on a P20-P30 substrate for very high toughness. The PS5960, general machining of steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SEKN style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Square shape
- General machining of steel
- New coating layer with superior wear resistance with high toughness substrate
SNMX 45 Degree Rich Mill Indexable Milling Inserts (Sangeo)
£7.50 exc. VAT10 pieces (Min. Order)
SNMX120512-QM PS5915S Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915 milling grade ideal for medium and roughing of steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SNMX style style carbide milling inserts
- PS5925 / PS5915 / PS5915S Grade: Steel/Hard Steel
- Negative geometry
- Square shape
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
SNMX1205ANN PS5930 45 Degree Rich Mill Indexable Milling Inserts (Sangeo)
£7.50 exc. VAT10 pieces (Min. Order)
SNMX1205ANN PS5930 / SNMX1205ANN PS5925 Indexable Carbide Milling Inserts. PS5930/PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SNMX style carbide milling inserts
- PS5930 / PS5915 / PS5915S / PS5925 Grade: Steel/Hard Steel
- Negative geometry
- Square shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
SNMX1205ANN PS7925 45 Degree Rich Mill Indexable Milling Inserts (Sangeo)
£7.50 exc. VAT10 pieces (Min. Order)
SNMX1205ANN PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on a M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard to cut materials and stainless steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SNMX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Negative geometry
- Square shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
