4 Flute Square End Mill
10mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4100-075-10 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 10 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 25 |
| L (Overall Length) | 75 |
| r (Radius) | – |
10mm 4 Flute PVD Coated DXF Mill Overall Length 100 Carbide End Mill – DXF4100-100-10 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 10 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 25 |
| L (Overall Length) | 100 |
| r (Radius) | – |
11mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4110-075-12 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 11 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 25 |
| L (Overall Length) | 75 |
| r (Radius) | – |
12mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4120-075-12 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | – |
12mm 4 Flute PVD Coated DXF Mill Overall Length 100 Carbide End Mill – DXF4120-100-12 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 100 |
| r (Radius) | – |
13mm 4 Flute PVD Coated DXF Mill Overall Length 100 Carbide End Mill – DXF4130-100-14 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 13 |
| ØD (Shaft Dia.) | 14 |
| l (Flute Length) | 30 |
| L (Overall Length) | 100 |
| r (Radius) | – |
14mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4140-100-14 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 14 |
| ØD (Shaft Dia.) | 14 |
| l (Flute Length) | 50 |
| L (Overall Length) | 100 |
| r (Radius) | – |
15mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4150-100-16 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 15 |
| ØD (Shaft Dia.) | 16 |
| l (Flute Length) | 50 |
| L (Overall Length) | 100 |
| r (Radius) | – |
16mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4160-100-16 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 16 |
| ØD (Shaft Dia.) | 16 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
18mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4180-100-18 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
1mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4010-050-04 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 1 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 3 |
| L (Overall Length) | 50 |
| r (Radius) | – |
20mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4200-100-20 (Sangeo)
The DXF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 20 |
| ØD (Shaft Dia.) | 20 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |