Showing 1–12 of 47 results

DGB2010-050-04 1mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£5.23 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 1
ØD (Shaft Dia.) 4
l (Flute Length) 3
L (Overall Length) 50
r (Radius)

DGB2010-050-06 1mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£10.14 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 1
ØD (Shaft Dia.) 6
l (Flute Length) 3
L (Overall Length) 50
r (Radius)

DGB2015-050-04 1,5mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£5.23 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 1,5
ØD (Shaft Dia.) 4
l (Flute Length) 4
L (Overall Length) 50
r (Radius)

DGB2015-050-06 1,5mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£10.14 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 1,5
ØD (Shaft Dia.) 6
l (Flute Length) 4
L (Overall Length) 50
r (Radius)

DGB2020-050-04 2mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£5.23 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 2
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius)

DGB2020-050-06 2mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£10.14 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 2
ØD (Shaft Dia.) 6
l (Flute Length) 6
L (Overall Length) 50
r (Radius)

DGB2025-050-04 2,5mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£5.23 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 2,5
ØD (Shaft Dia.) 4
l (Flute Length) 8
L (Overall Length) 50
r (Radius)

DGB2025-050-06 2,5mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£10.14 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 2,5
ØD (Shaft Dia.) 6
l (Flute Length) 8
L (Overall Length) 50
r (Radius)

DGB2030-050-04 3mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£5.23 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 3
ØD (Shaft Dia.) 4
l (Flute Length) 8
L (Overall Length) 50
r (Radius)

DGB2030-050-06 3mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£10.14 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 3
ØD (Shaft Dia.) 6
l (Flute Length) 8
L (Overall Length) 50
r (Radius)

DGB2030-075-03 3mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£6.93 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 3
ØD (Shaft Dia.) 3
l (Flute Length)
L (Overall Length) 75
r (Radius)

DGB2030-100-03 3mm 2 Flutes HrC45 Ball Nose Carbide Endmill (Sangeo)

£8.90 exc. VAT
10 pieces (Min. Order)

The DGB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.

Operation General milling for steel up to 45HrC
ØD (Cutting Dia.) 3
ØD (Shaft Dia.) 3
l (Flute Length)
L (Overall Length) 100
r (Radius)