100mm WNMU 90 Degree Face Mill for WNMU inserts – MFWN-90100R-08-9T-C (Sangeo)
£127.60 exc. VATThe MFWN-90100R-08-9T-C Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50mm – 200mm diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.
- Suitable for face milling, shoulder milling, slotting, ramping and helical cutting.
- Economy type face mill makes it perfect for low cost general machining.
- For 90°, Milling.
- Suitable for use with WNMU08 inserts.
- Coated inserts for general machining of Steel, Stainless Steel, Cast Iron &, Exotics.
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFWN 90100R-08-9T-C | 100 | 32 | 50 | 8 | 9T |
125mm WNMU 90 Degree Face Mill for WNMU inserts – MFWN-90125R-08-11T-C (Sangeo)
£139.90 exc. VATThe MFWN-90125R-08-11T-C Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50mm – 200mm in diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.
- Suitable for face milling, shoulder milling, slotting, ramping and helical cutting.
- Economy type face mill makes it perfect for low cost general machining.
- For 90°, Milling.
- Suitable for use with WNMU08 inserts.
- Coated inserts for general machining of Steel, Stainless Steel, Cast Iron &, Exotics.
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFWN 90125R-08-11T-C | 125 | 40 | 63 | 8 | 11T |
125mm WNMU 90 Degree Face Mill for WNMU inserts – MFWN-90125R-08-8T (Sangeo)
£139.90 exc. VATThe MFWN-90125R-08-8T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50mm – 200mm diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.
- Suitable for face milling, shoulder milling, slotting, ramping and helical cutting.
- Economy type face mill makes it perfect for low cost general machining.
- For 90°, Milling.
- Suitable for use with WNMU08 inserts.
- Coated inserts for general machining of Steel, Stainless Steel, Cast Iron &, Exotics.
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFWN 90125R-08-8T | 125 | 40 | 63 | 8 | 8T |
12mm APMT 90 Degree End Mill for APMT1003 inserts – MSAP-12-120-10-12-1T (Sangeo)
£32.70 exc. VATThe MSAP-12-120-10-12-1T End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 12mm – 40mm diameter and take the APKT10/APMT10 inserts.
- End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSAP 12-120-10-12-1T | 12 | 120 | 30 | 12 | 1T | 10 |
160mm WNMU 90 Degree Face Mill for WNMU inserts – MFWN-90160R-08-10T (Sangeo)
£166.90 exc. VATThe MFWN-90160R-08-10T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50mm – 200mm in diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.
- Suitable for face milling, shoulder milling, slotting, ramping and helical cutting.
- Economy type face mill makes it perfect for low cost general machining.
- For 90°, Milling.
- Suitable for use with WNMU08 inserts.
- Coated inserts for general machining of Steel, Stainless Steel, Cast Iron &, Exotics.
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFWN 90160R-08-10T | 160 | 40 | 63 | 8 | 10T |
16mm APMT 90 Degree End Mill for APKT11/APMT11 inserts – MSAP-16-160-11-15-2T-C (Sangeo)
£39.90 exc. VATThe MSAP-16-160-11-15-2T-C End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 16mm – 33mm diameter and take the APKT/APMT inserts.
- End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSAP 16-160-11-15-2T-C | 16 | 160 | 40 | 15 | 2T | 11 |
16mm APMT 90 Degree Screwed Shank End Mill for APKT11/APMT11 inserts – MMAP16-M08-11-2T-C (Sangeo)
£45.90 exc. VATThe MMAP 16-M08-11-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 16mm – 25mm diameter and take the APKT11/APMT11 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMAP 16-M08-11-2T-C | 16 | 50 | 28 | 8.5 | 2T | 8 | 11 |
16mm APMT 90 Degree Screwed Shank End Mill for APMT1003 inserts – MMAP-16-M08-10-2T-C (Sangeo)
£45.90 exc. VATThe MMAP-16-M08-10-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 16mm – 42mm in diameter and take the APKT10/APMT10 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMAP 16-M08-10-2T-C | 16 | 50 | 28 | 8.5 | 2T | 8 | 10 |
16mm RDHX Screwed Shank End Mill for RDHX/RDMW/RDMX inserts – MMRD-16-M08-08-2T-C (Sangeo)
£45.90 exc. VATThe MMRD-16-M08-08-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 16mm – 25mm diameter and take the RDHX/RDMW/RDMX inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMRD 16-M08-08-2T-C | 16 | 52 | 23 | 13 | 2T | 8 | 4 |
16mm RDHX/RDMW End Mill for RDHX/RDMW/RDMX inserts – MSRD-16-160-08-16-2T (Sangeo)
£37.50 exc. VATThe MSRD-16-160-08-16-2T End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 16mm – 25mm diameter and take the RDHX08/RDMW08/RDMX08 inserts.
- End Mill Style.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSRD 16-160-08-16-2T | 16 | 160 | 55 | 25 | 2T | 8 |
200mm WNMU 90 Degree Face Mill for WNMU inserts – MFWN-90200R-08-16T-C (Sangeo)
£199.80 exc. VATThe MFWN 90200R-08-16T-C Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50mm – 200mm diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.
- Suitable for face milling, shoulder milling, slotting, ramping and helical cutting.
- Economy type face mill makes it perfect for low cost general machining.
- For 90°, Milling.
- Suitable for use with WNMU08 inserts.
- Coated inserts for general machining of Steel, Stainless Steel, Cast Iron &, Exotics.
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFWN 90200R-08-16T-C | 200 | 60 | 63 | 8 | 16T |
20mm RDHX Screwed Shank End Mill for RDHX/RDMW/RDMX inserts – MMRD-20-M10-10-2T-C (Sangeo)
£49.90 exc. VATThe MMRD-20-M10-10-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 20mm – 42mm diameter and take the RDHX10/RDMW10/RDMX10 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMRD 20-M10-10-2T-C | 20 | 52 | 30 | 18 | 2T | 10 | 5 |
20mm RDHX/RDMW End Mill for RDHX/RDMW/RDMX inserts – MSRD-20-120-10-20-2T (Sangeo)
£39.90 exc. VATThe MSRD-20-120-10-20-2T End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 20mm – 40mm diameter and take the RDHX10/RDMW10/RDMX10 inserts.
- End Mill Style.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSRD 20-120-10-20-2T | 20 | 120 | 55 | 20 | 2T | 10 |
20mm SOMW End Mill for SOMW inserts – MSSO-20-160-08-20-2T (Sangeo)
£49.90 exc. VATThe MSSO-20-160-08-20-2T End Mill from Sangeo provides low cutting resistance and smooth chip flow. Holders range from 20MM – 32mm diameter and take the SOMW08 inserts.
- End Mill Style.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | PROGRAM RADIUS |
RPMX | |||||
| ØD | L | I | Ød | Z | S | |||
| MSSO 20-160-08-20-2T | 20 | 160 | 40 | 20 | 2T | 2 | 2,5 | 2°30′ |
24mm RDHX 90 Degree Screwed Shank End Mill for RDHX/RDMW/RDMX inserts – MMRD-24-M12-12-2T-C (Sangeo)
£49.90 exc. VATThe MMRD-24-M12-12-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 24mm – 42mm diameter and take the RDHX12/RDMW12/RDMX12 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMRD 24-M12-12-2T-C | 24 | 52 | 35 | 21 | 2T | 12 | 6 |
25mm APMT 90 Degree End Mill for APKT16/APMT16 inserts – MSAP-25-120-16-25-2T (Sangeo)
£49.50 exc. VATThe MSAP-25-120-16-25-2T End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 25mm – 40mm diameter and take the APKT16/APMT16 inserts.
- End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSAP 25-120-16-25-2T | 25 | 120 | 30 | 25 | 2T | 16 |
25mm APMT 90 Degree Screwed Shank End Mill for APKT16/APMT16 inserts – MMAP-25-M12-16-2T-C (Sangeo)
£49.90 exc. VATThe MMAP-25-M12-16-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 25mm – 42mm diameter and take the APKT16/APMT16 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMAP 25-M12-16-2T-C | 25 | 60 | 43 | 16 | 2T | 12 | 16 |
25mm RDHX/RDMW End Mill for RDHX/RDMW/RDMX inserts – MSRD-25-120-12-25-2T (Sangeo)
£41.50 exc. VATThe MSRD-25-120-12-25-2T End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 25-40mm diameter and take the RDHX12/RDMW12/RDMX12 inserts.
- End Mill Style.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSRD 25-120-12-25-2T | 25 | 120 | 55 | 25 | 2T | 12 |
25mm SOMW End Mill for SOMW inserts – MSSO-25-160-08-25-3T-C (Sangeo)
£58.49 exc. VATThe MSSO-25-160-08-25-3T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow. Holders range from 20mm – 42mm diameter and take the SOMW08 inserts.
- End Mill Style.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers’ tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | PROGRAM RADIUS |
RPMX | ||||||
| ØD | L | I | Ød | Z | S | M | |||
| MSSO 20-M10-08-2T-C | 20 | 52 | 30 | 12.5 | 2T | 2 | 10 | 2,5 | 2°30′ |
3PGX100404R-M PS5925 90 Degree Indexable Milling Inserts (Sangeo)
£7.00 exc. VAT10 pieces (Min. Order)
3PGX100404R-M / 3PGX100408R-M PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- 3PGX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Triangular shape
- The universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
3PGX100404R-M PS7925 90 Degree Indexable Milling Inserts (Sangeo)
£7.00 exc. VAT10 pieces (Min. Order)
3PGX100404R-M PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard-to-cut materials and Stainless Steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- 3PGX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Triangular shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
3PGX150508R-M PS5925 Indexable Carbide Milling Insert (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
3PGX150508R-M PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- 3PGX style carbide milling inserts
- Positive geometry
- Triangular shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
3PGX150508R-M PS7925 90 Degree Indexable Milling Inserts (Sangeo)
£9.00 exc. VAT10 pieces (Min. Order)
3PGX150508R-M PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard-to-cut materials and stainless steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- 3PGX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Triangular shape
- Milling grade for medium to roughing of hard-to-cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
40mm Alpha Mill 90 Degree Face Mill for APMT Inserts – MFAP-90040R-10-5T (Sangeo)
£85.00 exc. VATThe MFAP-90040R-10-5T series Alpha Mill is a 90 degree face mill style milling body that takes APMT inserts. Suitable for Face Milling, Shoulder Milling, Slotting, Ramping and Helical Cutting. The Alpha Mill offers the smoothest cutting action and the widest material application range (steels, stainless steel, cast iron, aluminium, exotics). It is the best ALL-ROUND system in terms of general performance across ALL metals.
- Helical cutting 90 degree face mill
- Low cutting resistance, ideal for lightweight machines or difficult to cut materials
- For use with APMT inserts which feature an Alpha Curve geometry for the smoothest cutting action
- Ideal for shoulder milling, facing, ramping, helical cutting and slotting
- Reduced machine stress
- Excellent surface finish
- Wide range of cutting widths and depths
- Wide chip pocket for better chip control
The MFAP 90040R-10-5T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 40mm -125mm in diameter and take the APMT/APKT inserts.
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFAP 90040R-10-5T | 40 | 16 | 40 | 10 | 5T |
