Solution is Our Job

Solution is Our Job

shipping

FAST SHIPPING

Fast and reliable delivery

contact

24/7 SUPPORT

In any case, contact us       

best quality

BEST QUALITY

Many years on the market

SOMW080315-FH PS5925 Indexable Carbide Milling Insert (Sangeo)

£7.58 exc. VAT
10 pieces (Min. Order)
SOMW080315-FH PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
  • SOMW style carbide milling inserts
  • Positive geometry
  • Square shape
  • Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
  • New coating layer with superior wear resistance with high toughness substrate

3PGX100404R-M PS5925 Indexable Carbide Milling Insert (Sangeo)

£8.17 exc. VAT
10 pieces (Min. Order)
3PGX100404R-M / 3PGX100408R-M PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
  • 3PGX style carbide milling inserts
  • Positive geometry
  • Triangular shape
  • Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
  • New coating layer with superior wear resistance with high toughness substrate

DXF4080-060-08 8mm HRC55 Flat Carbide Endmill (Sangeo)

The DXF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 8
ØD (Shaft Dia.) 8
l (Flute Length) 20
L (Overall Length) 60
r (Radius) -

MFWN 90050R-08-4T Milling Holder, 50mm, 90° Face Mill for WNMU Inserts (Sangeo)

£69.60 exc. VAT
The MFWN 90050R-08-4T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50-200mm diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.
DESCRIPTION DIMENSIONS
ØD Ød H ap Z
MFWN 90050R-08-4T 50 22 40 8 4T

DXB2080-060-08 8mm HRC55 Ball Nose Carbide Endmill (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 8
ØD (Shaft Dia.) 8
l (Flute Length) 20
L (Overall Length) 60
r (Radius) -

DXC4080-060-08-R0.5 8mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.
ØD (Cutting Dia.) 7
ØD (Shaft Dia.) 8
l (Flute Length) 20
L (Overall Length) 60
r (Radius) 0.5

DXC4080-060-08-R1.0 8mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.
ØD (Cutting Dia.) 7
ØD (Shaft Dia.) 8
l (Flute Length) 20
L (Overall Length) 60
r (Radius) 1.0

DGF4080-060-08 8mm 45HrC Flat Carbide Endmill (Sangeo)

The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 8
ØD (Shaft Dia.) 8
l (Flute Length) 20
L (Overall Length) 60
r (Radius) -

DXB2010-050-04 1mm HRC55 Ball Nose Carbide Endmill (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 1
ØD (Shaft Dia.) 4
l (Flute Length) 3
L (Overall Length) 50
r (Radius) -

DXB2020-050-04 2mm HRC55 Ball Nose Carbide Endmill (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 2
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius) -
 

DXB2030-050-03 3mm HRC55 Ball Nose Carbide Endmill (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 3
ØD (Shaft Dia.) 3
l (Flute Length) 8
L (Overall Length) 50
r (Radius) -

DXB2040-050-04 4mm HRC55 Ball Nose Carbide Endmill (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 4
ØD (Shaft Dia.) 4
l (Flute Length) 11
L (Overall Length) 50
r (Radius) -

DXB2050-050-05 5mm HRC55 Ball Nose Carbide Endmill (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 5
ØD (Shaft Dia.) 5
l (Flute Length) 13
L (Overall Length) 50
r (Radius) -

DXB2060-050-06 6mm HRC55 Ball Nose Carbide Endmill (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
ØD (Cutting Dia.) 6
ØD (Shaft Dia.) 6
l (Flute Length) 15
L (Overall Length) 50
r (Radius) -
JOIN OUR NEWSLETTER NOW

SIGN UP TO RECIEVE EMAIL UPDATES ON NEW PRODUCT ANNOUNCEMENTS, PROMOTIONS AND MORE...

Will be used in accordance with our Privacy Policy