Milling Holders
MFWN 90050R-08-4T Milling Holder, 50mm, 90° Face Mill for WNMU Inserts (Sangeo)
£69.60 exc. VATThe MFWN 90050R-08-4T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50-200mm diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFWN 90050R-08-4T | 50 | 22 | 40 | 8 | 4T |
MFAP 75063R-10-5T Milling Holder, 63mm, 75° Face Mill for APMT10/APKT10 Inserts (Sangeo)
The Sangeo MFAP 75063R-10-5T Milling Holder is a 75 degree face mill which takes APMT10/APKT10 inserts and is ideal for face milling on lightweight machines or difficult to cut materials. Diameters range from 63-100mm.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFAP 75063R-10-5T | 63 | 22 | 40 | 10 | 5T |
MFAP 75063R-16-4T Milling Holder, 63mm, 75° Face Mill for APMT16/APKT16 Inserts (Sangeo)
The Sangeo MFAP 75063R-16-4T Milling Holder is a 75 degree face mill which takes APMT16/APKT16 inserts and is ideal for face milling on lightweight machines or difficult to cut materials. Diameters range from 63-100mm.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFAP 75063R-16-4T | 63 | 22 | 40 | 16 | 4T |
MFAP 90040R-10-5T Milling Holder, 40mm, 90° Face Mill for APMT/APKT Inserts (Sangeo)
The MFAP 90040R-10-5T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 40-125mm diameter and take the APMT/APKT inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFAP 90040R-10-5T | 40 | 16 | 40 | 10 | 5T |
MFAP 90040R-16-4T Milling Holder, 40mm, 90° Face Mill for APMT16/APKT16 Inserts (Sangeo)
The MFAP 90040R-16-4T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 40-200mm diameter and take the APMT16/APKT16 inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFAP 90040R-16-4T | 40 | 16 | 40 | 16 | 4T |
MFAP 90050R-12-6T Milling Holder, 50mm, 90° Face Mill for APMT/APKT Inserts (Sangeo)
The MFAP 90050R-12-6T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50-80mm diameter and take the APMT/APKT inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFAP 90050R-12-6T | 50 | 22 | 40 | 12 | 6T |
MFAP 90050R-17-5T-C Milling Holder, 50mm, 90° Face Mill for APMT17/APKT17 Inserts (Sangeo)
The MFAP 90050R-17-5T-C Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50-100mm diameter and take the APMT17/APKT17 inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFAP 90050R-17-5T-C | 50 | 22 | 40 | 17 | 5T |
MFRD 040R-10-4T Milling Holder, 40mm, Face Mill for RDHX/RDMX Inserts (Sangeo)
The Sangeo MFRD 040R-10-4T Milling Holder is a mill which takes RDHX/RDMX inserts and is ideal for face milling on lightweight machines or difficult to cut materials. Diameters range from 40-125mm.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFRD 040R-10-4T | 40 | 16 | 40 | 5 | 4T |
MFRD 040R-12-4T Milling Holder, 40mm, Face Mill for RDHX/RDMX Inserts (Sangeo)
The Sangeo MFRD 040R-12-4T Milling Holder is a face mill which takes RDHX/RDMX inserts and is ideal for face milling on lightweight machines or difficult to cut materials. Diameters range from 40-125mm.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFRD 040R-12-4T | 40 | 16 | 40 | 6 | 4T |
MFRT 90040R-10-6T Milling Holder, 40mm, 90° Face Mill for RT Inserts (Sangeo)
The MFRT 90040R-10-6T Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 40-63mm diameter and take the RT inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFRT 90040R-10-6T | 40 | 16 | 40 | 10 | 6T |
MFSE 45050R-4T Milling Holder, 50mm, 45° Face Mill for SEET/SEHT Inserts (Sangeo)
The Sangeo MFSE 45050R-4T face mill is a 45 degree indexable milling tool that comes in multiple diameters ranging from 40mm – 160mm. This system utilises the high rake angle on the inserts as well as the 45 degree approach to achieve a low cutting resistance, smooth chip flow and low power requirements even in high feed/large depth of cut applications. MFSE face mill style milling body takes SEET/SEHT inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFSE 45050R-4T | 50 | 22 | 40 | 6 | 4T |
MFSN 45050R-5T Milling Holder, 50mm, 45° Face Mill for SNMX Inserts (Sangeo)
The Sangeo MFSN 45050R-5T face mill is a 45 degree indexable milling tool that comes in multiple diameters ranging from 50mm – 200mm. This system utilises the high rake angle on the inserts as well as the 45 degree approach to achieve a low cutting resistance, smooth chip flow and low power requirements even in high feed/large depth of cut applications. MFSN face mill style milling body takes SNMX inserts.
DESCRIPTION | DIMENSIONS | ||||
ØD | Ød | H | ap | Z | |
MFSN 45050R-5T | 50 | 22 | 40 | 6 | 5T |