APMT1604PDER-ALU US2915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1604PDER-ALU / APMT160420-ALU / APKM160424-ALU US2915 Indexable Carbide Milling Insert (Sangeo) Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- US2915 Grade: Aluminium & Non-Ferrous
- Positive geometry
- Parallelogram shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
Description
Product Information
Features & Benefits
The APMT1604PDER-ALU Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- Positive geometry
- Parallelogram shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
Specification
| Brand | Sangeo |
| Product Range | Indexable Milling Inserts |
| Insert Style | APMT |
| Relief Angle | 11° |
| Shape – Degrees | Parallelogram |
| Insert Geometry | Positive |
| Applicable Materials | Aluminium & Non-Ferrous |
| Chipbreaker | ALU |
| Grade Description | US2915 (K05-K25) |
| T | 4,76 |
| IC | 9,525 |
| Ød | 4,50 |
| ISO Code | APMT 1604 |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
- Free Shipping on All Orders
- International Tracked Service > £ 20
Related products
12mm APMT 90 Degree End Mill for APMT1003 inserts – MSAP-12-120-10-12-1T (Sangeo)
The MSAP-12-120-10-12-1T End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 12mm - 40mm diameter and take the APKT10/APMT10 inserts.
- End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers' tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSAP 12-120-10-12-1T | 12 | 120 | 30 | 12 | 1T | 10 |
16mm APMT 90 Degree Screwed Shank End Mill for APMT1003 inserts – MMAP-16-M08-10-2T-C (Sangeo)
The MMAP-16-M08-10-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 16mm - 42mm in diameter and take the APKT10/APMT10 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMAP 16-M08-10-2T-C | 16 | 50 | 28 | 8.5 | 2T | 8 | 10 |
20mm RDHX Screwed Shank End Mill for RDHX/RDMW/RDMX inserts – MMRD-20-M10-10-2T-C (Sangeo)
The MMRD-20-M10-10-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 20mm - 42mm diameter and take the RDHX10/RDMW10/RDMX10 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMRD 20-M10-10-2T-C | 20 | 52 | 30 | 18 | 2T | 10 | 5 |
25mm APMT 90 Degree End Mill for APKT16/APMT16 inserts – MSAP-25-120-16-25-2T (Sangeo)
The MSAP-25-120-16-25-2T End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 25mm - 40mm diameter and take the APKT16/APMT16 inserts.
- End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Insert grades for steel, stainless steel, cast iron, exotics and non-ferrous materials.
- Holders &, inserts compatible with other manufacturers' tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
- Suitable for use with Sangeo APMT/APKT insert.
| DESCRIPTION | DIMENSIONS | |||||
| ØD | L | I | Ød | Z | ap | |
| MSAP 25-120-16-25-2T | 25 | 120 | 30 | 25 | 2T | 16 |
25mm APMT 90 Degree Screwed Shank End Mill for APKT16/APMT16 inserts – MMAP-25-M12-16-2T-C (Sangeo)
The MMAP-25-M12-16-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 25mm - 42mm diameter and take the APKT16/APMT16 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMAP 25-M12-16-2T-C | 25 | 60 | 43 | 16 | 2T | 12 | 16 |
3PGX100404R-M PS7925 90 Degree Indexable Milling Inserts (Sangeo)
10 pieces (Min. Order)
3PGX100404R-M PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard-to-cut materials and Stainless Steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.- 3PGX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Triangular shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
40mm Alpha Mill 90 Degree Face Mill for APMT Inserts – MFAP-90040R-16-4T (Sangeo)
The MFAP-90040R-16-4T series Alpha Mill is a 90 degree face mill style milling body that takes APMT inserts. Suitable for Face Milling, Shoulder Milling, Slotting, Ramping and Helical Cutting. The Alpha Mill offers the smoothest cutting action and the widest material application range (steels, stainless steel, cast iron, aluminium, exotics). It is the best ALL-ROUND system in terms of general performance across ALL metals.
- Helical cutting 90 degree face mill
- Low cutting resistance, ideal for lightweight machines or difficult to cut materials
- For use with APMT inserts which feature an Alpha Curve geometry for the smoothest cutting action
- Ideal for shoulder milling, facing, ramping, helical cutting and slotting
- Reduced machine stress
- Excellent surface finish
- Wide range of cutting widths and depths
- Wide chip pocket for better chip control
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFAP 90040R-10-5T | 40 | 16 | 40 | 10 | 5T |
| DESCRIPTION | DIMENSIONS | ||||
| ØD | Ød | H | ap | Z | |
| MFAP 90040R-16-4T | 40 | 16 | 40 | 16 | 4T |
Reviews
There are no reviews yet.