4 Flute Corner Radius End Mill
10mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R0.5 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 10 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 25 |
| L (Overall Length) | 75 |
| r (Radius) | 0.5 |
10mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R1.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 10 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 25 |
| L (Overall Length) | 75 |
| r (Radius) | 1.0 |
10mm x 2.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R2.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 10 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 25 |
| L (Overall Length) | 75 |
| r (Radius) | 2.0 |
12mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4120-075-12-R0.5 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | 0.5 |
12mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4120-075-12-R1.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | 1.0 |
12mm x 2.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4120-075-12-R2.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | 2.0 |
14mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4140-080-14-R0.5 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 14 |
| ØD (Shaft Dia.) | 14 |
| l (Flute Length) | 30 |
| L (Overall Length) | 80 |
| r (Radius) | 0.5 |
14mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4140-080-14-R1.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 14 |
| ØD (Shaft Dia.) | 14 |
| l (Flute Length) | 30 |
| L (Overall Length) | 80 |
| r (Radius) | 1.0 |
16mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4160-100-16-R0.5 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 16 |
| ØD (Shaft Dia.) | 16 |
| l (Flute Length) | 30 |
| L (Overall Length) | 100 |
| r (Radius) | 0.5 |
16mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4160-100-16-R1.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 16 |
| ØD (Shaft Dia.) | 16 |
| l (Flute Length) | 30 |
| L (Overall Length) | 100 |
| r (Radius) | 1.0 |
18mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4180-100-18-R0.5 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | 1.0 |
18mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4180-100-18-R1.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | 30 |
| L (Overall Length) | 100 |
| r (Radius) | 1.0 |