Showing 1–12 of 15 results

DXC4020-050-04-R0.5 2mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 2
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius) 0.5

DXC4030-050-03-R0.5 3mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 3
ØD (Shaft Dia.) 3
l (Flute Length) 8
L (Overall Length) 50
r (Radius) 0.5

DXC4030-050-03-R1.0 3mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 3
ØD (Shaft Dia.) 3
l (Flute Length) 8
L (Overall Length) 50
r (Radius) 1.0

DXC4040-050-04-R0.5 4mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 4
ØD (Shaft Dia.) 4
l (Flute Length) 11
L (Overall Length) 50
r (Radius) 0.5

DXC4040-050-04-R1.0 4mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 4
ØD (Shaft Dia.) 4
l (Flute Length) 11
L (Overall Length) 50
r (Radius) 1.0

DXC4050-050-05-R0.5 5mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 5
ØD (Shaft Dia.) 5
l (Flute Length) 13
L (Overall Length) 50
r (Radius) 0.5

DXC4050-050-05-R1.0 5mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 5
ØD (Shaft Dia.) 5
l (Flute Length) 13
L (Overall Length) 50
r (Radius) 1.0

DXC4060-050-06-R0.5 6mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 6
ØD (Shaft Dia.) 6
l (Flute Length) 15
L (Overall Length) 50
r (Radius) 0.5

DXC4060-050-06-R1.0 6mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 6
ØD (Shaft Dia.) 6
l (Flute Length) 15
L (Overall Length) 50
r (Radius) 1.0

DXC4080-060-08-R0.5 8mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 7
ØD (Shaft Dia.) 8
l (Flute Length) 20
L (Overall Length) 60
r (Radius) 0.5

DXC4080-060-08-R1.0 8mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 7
ØD (Shaft Dia.) 8
l (Flute Length) 20
L (Overall Length) 60
r (Radius) 1.0

DXC4100-075-10-R0.5 10mm HRC55 Corner Radius Carbide Endmill (Sangeo)

The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius) 0.5