Flat
DXF4080-060-08 8mm HRC55 Flat Carbide Endmill (Sangeo)
The DXF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 8 |
| ØD (Shaft Dia.) | 8 |
| l (Flute Length) | 20 |
| L (Overall Length) | 60 |
| r (Radius) | – |
DGF4010-050-04 1mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 1 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 3 |
| L (Overall Length) | 50 |
| r (Radius) | – |
DGF4020-050-04 2mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 2 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 6 |
| L (Overall Length) | 50 |
| r (Radius) | – |
DGF4030-050-03 3mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 3 |
| ØD (Shaft Dia.) | 3 |
| l (Flute Length) | 8 |
| L (Overall Length) | 50 |
| r (Radius) | – |
DGF4040-050-04 4mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 4 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 11 |
| L (Overall Length) | 50 |
| r (Radius) | – |
DGF4050-050-05 5mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 5 |
| ØD (Shaft Dia.) | 5 |
| l (Flute Length) | 13 |
| L (Overall Length) | 50 |
| r (Radius) | – |
DGF4060-050-06 6mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 6 |
| ØD (Shaft Dia.) | 6 |
| l (Flute Length) | 15 |
| L (Overall Length) | 50 |
| r (Radius) | – |
DGF4100-075-10 10mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 10 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 25 |
| L (Overall Length) | 75 |
| r (Radius) | – |
DGF4120-075-12 12mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | – |
DGF4140-100-14 14mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 14 |
| ØD (Shaft Dia.) | 14 |
| l (Flute Length) | 50 |
| L (Overall Length) | 100 |
| r (Radius) | – |
DGF4160-100-16 16mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 16 |
| ØD (Shaft Dia.) | 16 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
DGF4180-100-18 18mm 45HrC Flat Carbide Endmill (Sangeo)
The DGF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for general milling for steel up to 45HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
