WNMU080608EN-ALU US2115 Indexable Face Milling Inserts (Sangeo)
£8.50 exc. VAT
WNMU080608EN-ALU Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- WNMUÂ style carbide milling inserts
- US2915 Grade: Aluminium & Non-FerrousÂ
- Negative geometry
- Trigon shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
Description
Product Information
Features & Benefits
The WNMU080608EN-ALU Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- WNMUÂ style carbide milling inserts
- Negative geometry
- Trigon shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
Specification
| Brand | Sangeo |
| Product Range | Indexable Milling Inserts |
| Insert Style | WNMU |
| Relief Angle | 11° |
| Shape – Degrees | Trigon |
| Insert Geometry | Negative |
| Applicable Materials | Aluminium & Non-Ferrous |
| Chipbreaker | ALU |
| Grade Description | US2915 (K05-K25) |
| TÂ | 6,40 |
| ICÂ | 12,7 |
| Ød | 4,40 |
| ISO Code | WNMU 0806 |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Shipping & Delivery
- Free Shipping on All Orders
- International Tracked Service > £ 20
Related products
24mm RDHX 90 Degree Screwed Shank End Mill for RDHX/RDMW/RDMX inserts – MMRD-24-M12-12-2T-C (Sangeo)
The MMRD-24-M12-12-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true perpendicular milling. Holders range from 24mm - 42mm diameter and take the RDHX12/RDMW12/RDMX12 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMRD 24-M12-12-2T-C | 24 | 52 | 35 | 21 | 2T | 12 | 6 |
25mm APMT 90 Degree Screwed Shank End Mill for APKT16/APMT16 inserts – MMAP-25-M12-16-2T-C (Sangeo)
The MMAP-25-M12-16-2T-C Screwed Shank End Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 25mm - 42mm diameter and take the APKT16/APMT16 inserts.
- Screwed Shank End Mill Style.
- Economical 90 Degree, square shoulder milling with ISO inserts.
- High rake angle provides low cutting resistance and smooth chip flow.
- Universal grade for steel, stainless and cast iron.
- Holders &, inserts compatible with other manufacturers tools.
- Low cost insert and holders.
- Perfect tool for low cost general machining.
| DESCRIPTION | DIMENSIONS | ||||||
| ØD | L | I | Ød | Z | M | ap | |
| MMAP 25-M12-16-2T-C | 25 | 60 | 43 | 16 | 2T | 12 | 16 |
3PGX100404R-M PS7925 90 Degree Indexable Milling Inserts (Sangeo)
10 pieces (Min. Order)
3PGX100404R-M PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard-to-cut materials and Stainless Steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- 3PGX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Triangular shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
APMT1035PDER-RM PS5915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT's low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1035PDER-RM PS5915 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915 milling grade is ideal for medium and roughing of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
RDHX12T3M0 PS7925 Indexable Milling Insert (Sangeo)
10 pieces (Min. Order)
RDHX12T3M0 PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on a M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard to cut materials and stainless steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- RDHXÂ style style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless SteelÂ
- Positive geometry
- Round shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
SEET12T3-FM PS5925 Indexable Milling Insert (Sangeo)
10 pieces (Min. Order)
SEET12T3-FM PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SEET style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard SteelÂ
- Positive geometry
- Square shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
SEHT12T3-CM US2915 Indexable Milling Insert (Sangeo)
10 pieces (Min. Order)
SEHT12T3-CM US2915 Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- SEHT style carbide milling inserts
- US2915 Grade: Aluminium & Non-FerrousÂ
- Positive geometry
- Square shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
Reviews
There are no reviews yet.