9.9mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)
£7.18 exc. VATThe Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.
- These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
- Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
- TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
- General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
- Split point for higher performance drilling
- Jobber length 5xD
- The most economic coated drill in our range
9mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2090-075-10 (Sangeo)
The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD Coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Ball nosed with short flutes.
- Designed for milling of radius bottom slots, fillets and special contours
| ØD (Cutting Dia.) | 9 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 20 |
| L (Overall Length) | 75 |
| r (Radius) | – |
9mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4090-075-10 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 9 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 20 |
| L (Overall Length) | 75 |
| r (Radius) | – |
9mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)
£6.32 exc. VATThe Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.
- These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
- Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
- TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
- General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
- Split point for higher performance drilling
- Jobber length 5xD
- The most economic coated drill in our range
APKT1135PDER-ALU US2915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VAT10 pieces (Min. Order)
APKT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APKT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
APKT1135PDER-ALU US2915 Indexable Carbide Milling Inserts for aluminium are available in a US2915 uncoated grade. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APKT style carbide milling inserts
- US2915 Grade: Aluminium & Non-Ferrous
- Positive geometry
- Parallelogram shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
APKT1604PDER-ALU US2915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
APKT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APKT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APKT1604PDER-ALU / APKT160420-ALU / APKT160424-ALU US2915 Indexable Carbide Milling Insert (Sangeo) Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APKT style carbide milling inserts
- US2915 Grade: Aluminium & Non-Ferrous
- Positive geometry
- Parallelogram shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
APMT1003PDER-ALU US2915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VATAPMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1003PDER-ALU US2915 Indexable Carbide Milling Inserts for Aluminium are available in a US2915 uncoated grade. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- US2915 Grade: Aluminium & Non-Ferrous
- Positive geometry
- Parallelogram shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
APMT1035PDER-RM PS5915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1035PDER-RM PS5915 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915 milling grade is ideal for medium and roughing of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
APMT1035PDER-RM PS7925 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT 1035 PDER-RM PS7925 / APMT1035PDSR-RM PS7920 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925/PS7920, medium to roughing of hard-to-cut materials and stainless steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
APMT1035PDSR-RM PS5925 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
APMT1035PDSR-RM PS5925 Indexable Carbide Milling Inserts. PS5925, feature a tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
APMT1135PDER-QH2 PS5925 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
- APMT style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
APMT1135PDER-QH2 PS5960 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
- APMT style carbide milling inserts
- PS5960 / PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- General machining of steel
- New coating layer with superior wear resistance with high toughness substrate