Showing 1–36 of 672 results

08IR-A55 PS9425 Partial Profile 55° Internal Right Hand Threading Inserts – PVD (Sangeo)

£8.75 exc. VAT
Sangeo single point threading inserts for Internal Right Hand Partial Profile 55° threads. Sangeo Size 08 = 4,76mm, Size 11 = 6,35mm, Size 16 = 9,525mm, Size 22= 12,70mm, Size 27= 15,875mm.
  • PVD coated grade for General Machining (HRSA’s, Cast Iron, Steel, Stainless Steel)

08IR-A60 PS9425 Partial Profile 60° Internal Right Hand Threading Inserts – PVD (Sangeo)

Sangeo single point threading inserts for Internal Right Hand Partial Profile 60° threads. Sangeo Size 08 = 4,76mm, Size 11 = 6,35mm, Size 16 = 9,525mm, Size 22= 12,70mm, Size 27= 15,875mm.
  • PVD coated grade for General Machining (HRSA’s, Cast Iron, Steel, Stainless Steel)

1.1mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.21 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.2mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.21 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.3mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.21 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.4mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.21 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.5mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2015-050-04 (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 1.5
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius)

 

1.5mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3015-050-04 Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

1.5mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.21 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.5mm MAGJ Grooving & Turning Inserts (Sangeo) – MAGJ150 PS9530

£7.10 exc. VAT
10 pieces (Min. Order)

MAGJ150 PS9530 inserts have convex dots on top corners to reduce chip width and ensure smooth chip control. MAGJ series has 2-6mm insert widths and coated inserts for steel, stainless steel, exotics, and cast iron machining. 16mm Insert Size, 1.5mm Insert Width, Cast Iron/Steel/Stainless Steel, PVD Coated. Suitable for “MGMN” style holders.

  • MAGJ inserts have convex dots on the top corner to reduce chip width and ensure smoother chip control.
  • Double edged inserts provide a lower cost per edge.
  • MAGJ is designed for grooving and turning applications.
  • MAGJ system reduces cycle time and increases productivity with the ability to groove, turn, face or copy in 1 application and using 1 tool.
  • Insert widths from 2-6mm.
  • Coated inserts for steel, stainless steel, exotics and cast iron machining.
  • Unique ‘W shape’ clamping system to increase machining stability.
MAGJ150 DIMENSIONS (mm)
W r l M h α
1.50 0.15 16.00 1.20 3.50

1.6mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.32 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.7mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.32 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.8mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.32 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

1.9mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£2.32 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

10.2mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£7.89 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

10.5mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£7.89 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

100mm WNMU 90 Degree Face Mill for WNMU inserts – MFWN-90100R-08-9T-C (Sangeo)

£127.60 exc. VAT

The MFWN-90100R-08-9T-C Face Mill from Sangeo provides low cutting resistance and smooth chip flow with true 90 degree perpendicular milling. Holders range from 50mm – 200mm diameter and take the WNMU (trigonal inserts with 6 helical cutting edges) inserts.

  • Suitable for face milling, shoulder milling, slotting, ramping and helical cutting.
  • Economy type face mill makes it perfect for low cost general machining.
  • For 90°, Milling.
  • Suitable for use with WNMU08 inserts.
  • Coated inserts for general machining of Steel, Stainless Steel, Cast Iron &, Exotics.
DESCRIPTION DIMENSIONS
ØD Ød H ap Z
MFWN 90100R-08-9T-C 100 32 50 8 9T

10mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2100-075-10 (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius)

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-075-10 Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-075-10 Series (Sangeo)

The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius)

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-100-10 Long Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-100-10 Long Series (Sangeo)

The Sangeo DGA Long (100mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 40
L (Overall Length) 100
r (Radius)

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-150-10 Extra Long Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-150-10 Extra Long Series (Sangeo)

The Sangeo DGA Extra Long (150mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length)
L (Overall Length) 150
r (Radius)

10mm 3 Flute DLC Coated DXU U-Slot Mill Carbide End Mill – DXU3100-75-10 (Ageo)

The Ageo DXA series DLC coated carbide helix cutter has 3 flutes and a 20mm plain shank. These slot End Mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality Micrograin carbide, 55 HRC
  • Exclusive Ageo DLC-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
  • DLC Coated solid carbide
  • Long length
  • 3 Flute
  • Plain shank

10mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4100-075-10 (Sangeo)

The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality micrograin carbide.
  • Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Available on plain shanks.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius)

10mm 4 Flute PVD Coated DXF Mill Overall Length 100 Carbide End Mill – DXF4100-100-10 (Sangeo)

The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality micrograin carbide.
  • Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Available on plain shanks.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 100
r (Radius)

10mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£7.22 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

10mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R0.5 (Sangeo)

The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius) 0.5

 

10mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R1.0 (Sangeo)

The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius) 1.0

10mm x 2.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R2.0 (Sangeo)

The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius) 2.0

11.5mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)

£9.82 exc. VAT

The Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.

  • These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
  • Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
  • TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
  • General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
  • Split point for higher performance drilling
  • Jobber length 5xD
  • The most economic coated drill in our range

11ER-0.35ISO PS9425 Metric ISO External Right Hand Threading Inserts – PVD (Sangeo)

Sangeo single point threading inserts for External Right Hand Metric ISO threads. (Sangeo Size 08 = 4,76mm, Size 11 = 6,35mm, Size 16 = 9,525mm, Size 22= 12,70mm, Size 27= 15,875mm.)

  • PVD coated grade for General Machining (HRSA’s, Cast Iron, Steel, Stainless Steel)

11ER-1.00ISO PS7430 Metric ISO External Right Hand Threading Inserts – PVD (Sangeo)

Sangeo single point threading inserts for External Right Hand Metric ISO threads. (Sangeo Size 08 = 4,76mm, Size 11 = 6,35mm, Size 16 = 9,525mm, Size 22= 12,70mm, Size 27= 15,875mm.)

  • PVD coated grade for Steel, Stainless Steel

11ER-1.5TR PS9425 Trapezoidal External Right Hand Threading Inserts – PVD (Sangeo)

Sangeo single point threading inserts for External Right Hand Trapezoidal threads. (Sangeo Size 08 = 4,76mm, Size 11 = 6,35mm, Size 16 = 9,525mm, Size 22= 12,70mm, Size 27= 15,875mm.)

  • PVD coated grade for General Machining (HRSA’s, Cast Iron, Steel, Stainless Steel)

11ER-14BSPT PS9425 BSPT External Right Hand Threading Inserts – PVD (Sangeo)

Sangeo single point threading inserts for External Right Hand BSPT threads. (Sangeo Size 08 = 4,76mm, Size 11 = 6,35mm, Size 16 = 9,525mm, Size 22= 12,70mm, Size 27= 15,875mm.)

  • PVD coated grade for General Machining (HRSA’s, Cast Iron, Steel, Stainless Steel)