APMT1135PDER-QH2 PS7915S 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£4.50 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1135PDER-QH2 / APMT1135PDER-QM2 / APMT1135PDSR-QM PS5960 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+Al2O3+TiN layer on a P20-P30 substrate for very high toughness. The PS5960, general machining of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- PS7915S / PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
APMT1604PDER-ALU US2915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VATAPMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1604PDER-ALU / APMT160420-ALU / APKM160424-ALU US2915 Indexable Carbide Milling Insert (Sangeo) Indexable Carbide Milling Inserts for aluminium available in a US2915 uncoated grade. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- US2915 Grade: Aluminium & Non-Ferrous
- Positive geometry
- Parallelogram shape
- Milling grade for machining of Aluminium & Non-Ferrous
- Increased wear & chipping resistance as using a ultra fine substrate
- Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
APMT1604PDER-RM PS5915 90 Degree Alpha Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT160412-RM PS5915 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915, general machining of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style style carbide milling inserts
- PS5960 / PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
APMT1604PDER-RM PS5925 Indexable Carbide Milling Insert (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT160412-RM PS5915 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5925, general machining of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- PS5960 / PS5925 / PS5915 Grade: Steel/Hard Steel
- Positive geometry
- Parallelogram shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
APMT1604PDER-RM PS7925 Indexable Carbide Milling Insert (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
APMT Alpha Mill inserts have a long tool life at high speed, high feed and deeper cutting due to a low cutting resistance and strong cutting edge making them ideal for 90-degree helical milling. The APMT’s low cutting resistance is achieved by the unique Sangeo insert design, which utilises the Alpha Curve cutting edge and a convex/concave design.
Minimum interference for better chip control
Chip breaker
All positive shaped sides to minimize interference
High rake angle
Decreasing cutting resistance
Sharp cutting edge
The APMT1604PDER-RM PS7925/PS7920 Indexable Carbide Milling Inserts feature tough PVD-coated MT-TiCN+Al2O3+TiN layer on a P20-P30 substrate for very high toughness. The PS7925/PS7920, general machining of steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- APMT style carbide milling inserts
- PS7915S / PS7925 / PS7915 Grade: Stainless Steel
- Positive geometry
- Parallelogram shape
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
AXMX High Feed HFM Mill Indexable Milling Inserts (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
AXMX070204R PS5925 Indexable Carbide Milling Inserts. PS5925, feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- AXMX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Parallelogram shape
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
BLGX High Feed HFM Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
BLGX0603R-M PS5925 high feed inserts for the Sangeo HFMD high feed milling system. The 4 corners, double-sided inserts and high speed/high feed machining achieve the ultimate productivity and efficiency. The insert’s high rake angle and helix design can achieve significantly reduced cutting resistance allowing the HFMD system to machine high speeds and feeds.
Sangeo BLGX high-feed milling inserts for use with HFMD Milling bodies
Unique insert geometry features a high rake angle and helix design
Ideal for high speed and high feed machining with low cutting resistance
Excellent clamping stability due to the unique clamping system and insert
pocket Increased stability helps minimise noise and vibration, thus giving an excellent surface finish.
No need to change the holder if you use the TaeguTec holder.
BLGX0603R-M PS5925 Indexable Indexable Carbide Milling Inserts. PS5925, feature a tough PVD-coated MT-TiCN+TiC+Al2O3+TiN layer on a P15-P35 / M10-M20 substrate for very high toughness. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- BLGX style carbide milling inserts
- PS5925 / PS5915 Grade: Steel/Hard Steel
- Universal grade for interrupted machining of steel, cast-iron, hard to cut materials and stainless steel with stable machinability
- New coating layer with superior wear resistance with high toughness substrate
BLGX0603R-M PS7925 High Feed HFM Mill Indexable Milling Inserts (Sangeo)
£6.00 exc. VAT10 pieces (Min. Order)
BLGX high feed inserts for the Sangeo HFMD high feed milling system. The 4 corners, double-sided inserts and high speed/high feed machining achieve the ultimate productivity and efficiency. The insert’s high rake angle and helix design can achieve significantly reduced cutting resistance allowing the HFMD system to machine high speeds and feeds.
Sangeo BLGX high-feed milling inserts for use with HFMD Milling bodies
Unique insert geometry features a high rake angle and helix design
Ideal for high speed and high feed machining with low cutting resistance
Excellent clamping stability due to the unique clamping system and insert pocket
Increased stability helps minimise noise and vibration, thus giving an excellent surface finish.
No need to change the holder if you use the TaeguTec holder.
The BLGX0603R-M PS7925 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+α-Al2O3 layer on an M20-M30 substrate for very high toughness. The PS7925, medium to roughing of hard-to-cut materials and stainless steel. Sangeo’s range of milling inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- BLGX style carbide milling inserts
- PS7925 / PS7915 Grade: Stainless Steel
- Milling grade for medium to roughing of hard to cut materials and stainless steel
- 2-4 micron Nano AlCrN AlCrSiN coating
BLGX0603R-MM PS5915 Indexable Carbide Milling Insert (Sangeo)
£7.00 exc. VAT10 pieces (Min. Order)
BLGX high feed inserts for the Sangeo HFMD high feed milling system. The 4 corners, double-sided inserts and high speed/high feed machining achieve the ultimate productivity and efficiency. The insert’s high rake angle and helix design can achieve significantly reduced cutting resistance allowing the HFMD system to machine high speeds and feeds.
Sangeo BLGX high-feed milling inserts for use with HFMD Milling bodies
Unique insert geometry features a high rake angle and helix design
Ideal for high speed and high feed machining with low cutting resistance
Excellent clamping stability due to the unique clamping system and insert pocket
Increased stability helps minimise noise and vibration, thus giving an excellent surface finish.
No need to change the holder if you use the TaeguTec holder.
The BLGX0603R-MM PS5915 Indexable Carbide Milling Inserts feature tough PVD coated MT-TiCN+TiC+Al2O3+TiN layer on a P05-P25 substrate for very high toughness. The PS5915 milling grade ideal for medium and roughing of steel. Sangeo’s range of milling inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- BLGX style carbide milling inserts
- PS5925 / PS5915 Grade: Stainless Steel
- Milling grade for medium and roughing of steel
- New coating layer with superior wear resistance with high toughness substrate
CCGT060204-ALU US2115 Finishing Carbide Turning Inserts (Sangeo)
£3.50 exc. VAT10 pieces (Min. Order)
The CCGT060204-ALU US2115 series carbide turning inserts have a Rhombic 80° shape and a Positive insert geometry. The ALU chip breaker is designed for Medium applications and comes in a US2115 uncoated grade for Aluminium & Non-Ferrous. Sangeo’s range of turning inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
US2115; Increased wear & chipping resistance by using an ultra-fine substrate, Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
- CCGT-style Carbide Turning Inserts
- US2115 uncoated grade ideal for a mirror finish turning of Aluminium & Non-Ferrous materials
- Positive Geometry
- Ground AK chip-breaker with sharp cutting edge, ultra-high positive rake and buffed top face. Provides excellent chip control in small to large depths of cut whilst ensuring mirror finish results
- Rhombic 80° Shape
CCGT060208-ALU US2115 Medium Finishing Carbide Turning Inserts (Sangeo)
£3.50 exc. VAT10 pieces (Min. Order)
The CCGT060208-ALU US2115 series carbide turning inserts have a Rhombic 80° shape and a Positive insert geometry. The ALU chip breaker is designed for Medium applications and comes in a US2115 uncoated grade for Aluminium & Non-Ferrous. Sangeo’s range of turning inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
US2115; Increased wear & chipping resistance by using an ultra fine substrate, Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
- CCGT-style Carbide Turning Inserts
- US2115 uncoated grade ideal for a mirror finish turning of Aluminium & Non-Ferrous materials
- Positive Geometry
- Ground AK chip-breaker with sharp cutting edge, ultra-high positive rake and buffed top face. Provides excellent chip control in small to large depths of cut whilst ensuring mirror finish results
- Rhombic 80° Shape
CCGT09T304-ALU US2115 Finishing Carbide Turning Inserts (Sangeo)
£3.90 exc. VAT10 pieces (Min. Order)
The CCGT09T304-ALU US2115 series carbide turning inserts have a Rhombic 80° shape and a Positive insert geometry. The ALU chip breaker is designed for Medium applications and comes in a US2115 uncoated grade for Aluminium & Non-Ferrous. Sangeo’s range of turning inserts is made from a fine micro-grain carbide substrate for excellent toughness and performance.
- CCGT-style Carbide Turning Inserts
- US2115 uncoated grade ideal for a mirror finish turning of Aluminium & Non-Ferrous materials
- Positive Geometry
- Ground AK chip-breaker with sharp cutting edge, ultra-high positive rake and buffed top face. Provides excellent chip control in small to large depths of cut whilst ensuring mirror finish results
- Rhombic 80° Shape