32mm SKTER Right Hand External Grooving, Side Turning & Parting Off Tool Holder for 4mm MAG Inserts – SKTER-3232-4T22 Series (Sangeo)
£58.80 exc. VATThe SKTE series holders are suitable for external grooving, side turning & parting off with just 1 tool. These holders are for insert widths of 2-6mm with T-Max from 12-40mm. SKTE holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm SKTER Right Hand External Grooving, Side Turning & Parting Off Tool Holder for 5mm MAG Inserts – SKTER-3232-5T25 Series (Sangeo)
£58.80 exc. VATThe SKTE series holders are suitable for external grooving, side turning & parting off with just 1 tool. These holders are for insert widths of 2-6mm with T-Max from 12-40mm. SKTE holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm SKTER Right Hand External Grooving, Side Turning & Parting Off Tool Holder for 6mm MAG Inserts – SKTER-3232-5T25 Series (Sangeo)
£58.80 exc. VATThe SKTE series holders are suitable for external grooving, side turning & parting off with just 1 tool. These holders are for insert widths of 2-6mm with T-Max from 12-40mm. SKTE holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm SKTIR Right Hand Internal Grooving, Side Turning & Parting Off Tool Holder for 3mm MAG Inserts – SKTIR-32-3T8 Series (Sangeo)
£49.90 exc. VATThe SKTI series holders are suitable for internal grooving, side turning & parting off with just 1 tool. These holders are for insert widths of 2-6mm with T-Max from 12-40mm. SKTI holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm SKTIR Right Hand Internal Grooving, Side Turning & Parting Off Tool Holder for 4mm MAG Inserts – SKTIR-32-4T6 Series (Sangeo)
£49.90 exc. VATThe SKTI series holders are suitable for internal grooving, side turning & parting off with just 1 tool. These holders are for insert widths of 2-6mm with T-Max from 12-40mm. SKTI holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm SKTIR Right Hand Internal Grooving, Side Turning & Parting Off Tool Holder for 5mm MAG Inserts – SKTIR-32-5T7 Series (Sangeo)
£49.90 exc. VATThe SKTI series holders are suitable for internal grooving, side turning & parting off with just 1 tool. These holders are for insert widths of 2-6mm with T-Max from 12-40mm. SKTI holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm STTER Right Hand External Grooving Holder for 3mm SAG Inserts – STTER-3232-3T22 Series (Sangeo)
£49.90 exc. VATThe STTE series holders are suitable for external grooving, side turning & parting off with just 1 tool. These holders are for insert widths of 2-4mm with T-Max from 15-22mm. STTE holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm STTIR Right Hand Internal Grooving Holder for 3mm SAG Inserts – STTIR32-3T6 Series (Sangeo)
£42.30 exc. VATThe STTI series holders are suitable for internal grooving, parting and profiling with just 1 tool. These holders are for insert widths 2mm-4mm with T-Max from 4mm-8mm. STTI holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
32mm STTIR Right Hand Internal Grooving Holder for 4mm SAG Inserts – STTIR25-4T6 Series (Sangeo)
£42.30 exc. VATThe STTI series holders are suitable for internal grooving, parting and profiling with just 1 tool. These holders are for insert widths 2mm-4mm with T-Max from 4mm-8mm. STTI holders feature an extremely strong clamping system with 2 clamping positions on the top and bottom of the insert to equally disperse clamping force, increasing rigidity, accuracy and tool life.
Available in right or left hand types.
3mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2030-050-03 (Sangeo)
The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD Coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Ball nosed with short flutes.
- Designed for milling of radius bottom slots, fillets and special contours
| ØD (Cutting Dia.) | 3 |
| ØD (Shaft Dia.) | 3 |
| l (Flute Length) | 8 |
| L (Overall Length) | 50 |
| r (Radius) | – |
3mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3030-050-03 Series (Sangeo)
The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 3 |
| ØD (Shaft Dia.) | 3 |
| l (Flute Length) | 8 |
| L (Overall Length) | 50 |
| r (Radius) | – |
3mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3030-050-04 Series (Angeo)
The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide, 45 HRC
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank