4mm 3 Flute DLC Coated DXU U-Slot Mill Carbide End Mill – DXU3040-50-4 (Ageo)
The Ageo DXA series DLC coated carbide helix cutter has 3 flutes and a 20mm plain shank. These slot End Mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality Micrograin carbide, 55 HRC
- Exclusive Ageo DLC-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
- DLC Coated solid carbide
- Long length
- 3 Flute
- Plain shank
Description
The Ageo DXA series DLC coated carbide helix cutter has 3 flutes and a 20mm plain shank. These slot End Mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality Micrograin carbide, 55 HRC
- Exclusive Ageo DLC-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
- DLC Coated solid carbide
- Long length
- 3 Flute
- Plain shank
Shipping & Delivery
- Free Shipping on All Orders
- International Tracked Service > £ 20
Related products
10mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4100-075-10 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 10 |
| ØD (Shaft Dia.) | 10 |
| l (Flute Length) | 25 |
| L (Overall Length) | 75 |
| r (Radius) | - |
12mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3120-075-12 Series (Sangeo)
The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | - |
16mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4160-100-16 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 16 |
| ØD (Shaft Dia.) | 16 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | - |
2mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4020-050-04 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 2 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 6 |
| L (Overall Length) | 50 |
| r (Radius) | - |
3mm 3 Flute DLC Coated DXU U-Slot Mill Carbide End Mill – DXU3030-50-4 (Ageo)
The Ageo DXA series DLC coated carbide helix cutter has 3 flutes and a 20mm plain shank. These slot End Mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality Micrograin carbide, 55 HRC
- Exclusive Ageo DLC-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
- DLC Coated solid carbide
- Long length
- 3 Flute
- Plain shank
6mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3060-050-06 Series (Ageo)
The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide, 45 HRC
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
6mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4060-050-06 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 6 |
| ØD (Shaft Dia.) | 6 |
| l (Flute Length) | 15 |
| L (Overall Length) | 50 |
| r (Radius) | - |
8mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3080-060-08 Series (Ageo)
The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide, 45 HRC
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank