Turning Carbides
DCMT11T304-VW PS7220S Carbide Turning Inserts (Sangeo)
£3.99 exc. VAT10 pieces (Min. Order)
The DCMT11T304-VW PS7220S series carbide turning inserts have a Rhombic 55° shape and a Positive insert geometry. The VW chipbreaker is designed for Medium-Finishing applications and comes in a PS7220S grade ideal for M10-M30 Stainless Steel / S10-S25 HRSA’s / K10-K20 Cast Iron / H05-H10 Hardened Steels. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS7220S excellent in medium speed machining of stainless steel. As adapting Salina coating which has excellent resistance for thermal & oxidation
VW chipbreaker is the first choice chipbreaker for positive geometry inserts for stainless steel, cast iron and exotics
- DCMT-style Carbide Turning Inserts
- PS7220S is the Bestselling P25 medium grade for continuous to light intermittent turning of all stainless steels, cast iron, exotics and super alloy. The perfect combination of wear resistance and toughness
- Positive Geometry
- VW chip breaker designed for Medium to finishing of stainless steels, cast iron, exotics and super alloy with positive geometry inserts. Sharp cutting edge and wide chip pocket for the low cutting load. Excellent surface finish
- Rhombic 55° Shape
DCMT11T308-HM CS5225 Carbide Turning Inserts (Sangeo)
£3.99 exc. VAT10 pieces (Min. Order)
The DCMT11T308-HM CS5225 series carbide turning inserts have a Rhombic 55° shape and a Positive insert geometry. The HM chipbreaker is designed for Medium-Finishing applications and comes in a CS5225 grade ideal for P15-P35 Steel. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
CS5225 is the first recommended grade for general machining with the use of high toughness substrate and coating layer with improved welding/chipping resistance
- DCMT-style Carbide Turning Inserts
- CS5225 is the Bestselling P25 medium grade for continuous to light intermittent turning of all steels. The perfect combination of wear resistance and toughness
- Positive Geometry
- HF chip breaker designed for Medium to finishing of steel with positive geometry inserts. Sharp cutting edge and wide chip pocket for the low cutting load. Excellent surface finish
- Rhombic 55° Shape
DCMT11T308-VW PS7220S Medium-Finishing Carbide Turning Inserts (Sangeo)
£3.99 exc. VAT10 pieces (Min. Order)
The DCMT11T308-VW PS7220S series carbide turning inserts have a Rhombic 55° shape and a Positive insert geometry. The VW chipbreaker is designed for Medium-Finishing applications and comes in a PS7220S grade ideal for M10-M30 Stainless Steel / S10-S25 HRSA’s / K10-K20 Cast Iron / H05-H10 Hardened Steels. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS7220S excellent in medium speed machining of stainless steel. As adapting Salina coating which has excellent resistance for thermal & oxidation
VW chipbreaker is the first choice chipbreaker for positive geometry inserts for stainless steel, cast iron and exotics
- DCMT-style Carbide Turning Inserts
- PS7220S is the Bestselling P25 medium grade for continuous to light intermittent turning of all stainless steels, cast iron, exotics and super alloy. The perfect combination of wear resistance and toughness
- Positive Geometry
- VW chip breaker designed for Medium to finishing of stainless steels, cast iron, exotics and super alloy with positive geometry inserts. Sharp cutting edge and wide chip pocket for the low cutting load. Excellent surface finish
- Rhombic 55° Shape
DNMG110404-TS PS5125 Carbide Turning Inserts (Sangeo)
£4.15 exc. VAT10 pieces (Min. Order)
The DNMG110404-TS PS5125 series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The TS chipbreaker is designed for Medium-Roughing applications and comes in a PS5125 grade ideal for P05-P25 Steel, M10-M20 Stainless Steel. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS5125 Stable machinability with chipping resistance fracture resistance and welding resistance, Medium, roughing and heavy interrupted cutting for stainless steel and forged steel
PS5125 PVD coated grade. PVD coating prolongs tool life under the same cutting conditions compared to uncoated carbide
- DNMG style Carbide Turning Inserts
- PS5125 Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing
- Negative Geometry TS chip breaker is the 1st choice for stainless steel and duplex continuous turning. Wide chip pockets for stable chip evacuation at a high depth of cuts and high feeds.
- Rhombic 55° Shape
DNMG110404-TS PS7220S Carbide Turning Inserts (Sangeo)
£4.15 exc. VAT10 pieces (Min. Order)
The DNMG110404-TS PS7220S series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The TS chipbreaker is designed for Medium-Finishing applications and comes in a PS7220S grade ideal for M10-M30 Stainless Steel / S10-S25 HRSA’s / K10-K20 Cast Iron / H05-H10 Hardened Steels. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS7220S excellent in medium speed machining of stainless steel. As adapting Salina coating which has excellent resistance for thermal & oxidation
TS chipbreaker is the first choice chipbreaker for Negative geometry inserts for stainless steel, cast iron and exotics
- DNMG style Carbide Turning Inserts
- PS7220S Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing
- Negative Geometry TS chip breaker is the 1st choice for stainless steel and duplex continuous turning. Wide chip pockets for stable chip evacuation at a high depth of cuts and high feeds.
- Rhombic 55° Shape
DNMG110408-TS PS5125 Carbide Turning Inserts (Sangeo)
£4.15 exc. VAT10 pieces (Min. Order)
The DNMG110408-TS PS5125 series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The TS chipbreaker is designed for Medium-Roughing applications and comes in a PS5125 grade ideal for P05-P25 Steel, M10-M20 Stainless Steel. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS5125 Stable machinability with chipping resistance fracture resistance and welding resistance, Medium, roughing and heavy interrupted cutting for stainless
steel and forged steel
PS5125 PVD coated grade. PVD coating prolongs tool life under the same cutting conditions compared to uncoated carbide.
- DNMG style Carbide Turning Inserts
- PS5125 / PS5125 Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing
- Negative Geometry TS chip breaker is the 1st choice for stainless steel and duplex continuous turning. Wide chip pockets for stable chip evacuation at a high depth of cuts and high feeds.
- Rhombic 55° Shape
DNMG110408-TS PS7220S Carbide Turning Inserts (Sangeo)
£4.15 exc. VAT10 pieces (Min. Order)
The DNMG110408-TS PS7220S series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The TS chipbreaker is designed for Medium-Finishing applications and comes in a PS7220S grade ideal for M10-M30 Stainless Steel / S10-S25 HRSA’s / K10-K20 Cast Iron / H05-H10 Hardened Steels. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS7220S excellent in medium speed machining of stainless steel. As adapting Salina coating which has excellent resistance for thermal & oxidation
TS chipbreaker is the first choice chipbreaker for Negative geometry inserts for stainless steel, cast iron and exotics
- DNMG style Carbide Turning Inserts
- PS7220S Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing
- Negative Geometry TS chip breaker is the 1st choice for stainless steel and duplex continuous turning. Wide chip pockets for stable chip evacuation at a high depth of cuts and high feeds.
- Rhombic 55° Shape
DNMG150604 CS5225 Carbide Turning Inserts (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
The DNMG150604 CS5225 series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The CS5225 chipbreaker is designed for Medium applications and ideal for P15-P35 Steel. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
CS5225 is the first recommended grade for general machining with the use of high toughness substrate and coating layer with improved welding/chipping resistance
- DNMG style Carbide Turning Inserts
- PS5125 / PS5125 Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing.
- Negative Geometry M class tolerance CS5225 Chipbreaker designed for negative inserts (CNMG, DNMG etc). A strong cutting edge with a high rake chip breaker design provides the best geometry for heavy or unstable turning conditions for machining aluminium or non-ferrous alloys.
- Rhombic 55° Shape
DNMG150604 PS7220S Carbide Turning Inserts (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
The DNMG150604 PS7220S series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The PS7220S chipbreaker is designed for Medium-Finishing applications and ideal for M10-M30 Stainless Steel / S10-S25 HRSA’s / K10-K20 Cast Iron / H05-H10 Hardened Steels. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS7220S excellent in medium speed machining of stainless steel. As adapting Salina coating which has excellent resistance for thermal & oxidation
PS7220S chipbreaker is the first choice chipbreaker for Negative geometry inserts for stainless steel, cast iron and exotics
- DNMG style Carbide Turning Inserts
- PS7220S Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing
- Negative Geometry TS chip breaker is the 1st choice for stainless steel and duplex continuous turning. Wide chip pockets for stable chip evacuation at a high depth of cuts and high feeds.
- Rhombic 55° Shape
DNMG150604-ALU US2115 Carbide Turning Inserts (Sangeo)
£6.50 exc. VAT10 pieces (Min. Order)
The DNMG150604-ALU US2115 series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The ALU chipbreaker is designed for Medium applications and comes in a US2115 uncoated grade for Aluminium & Non-Ferrous. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
- US2115; Increased wear & chipping resistance as using a ultra fine substrate, Excellent tool life with special surface treatment & sharp cutting edge of ALU chip breaker
DNMG150608 CS5225 Carbide Turning Inserts (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
The DNMG150608 CS5225 series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The CS5225 chipbreaker is designed for Medium applications and ideal for P15-P35 Steel. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
CS5225 is the first recommended grade for general machining with the use of high toughness substrate and coating layer with improved welding/chipping resistance
- DNMG style Carbide Turning Inserts
- PS5125 / PS5125 Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing.
- Negative Geometry
- M class tolerance CS5225 Chipbreaker designed for negative inserts (CNMG, DNMG etc). A strong cutting edge with a high rake chip breaker design provides the best geometry for heavy or unstable turning conditions for machining aluminium or non-ferrous alloys.
- Rhombic 55° Shape
DNMG150608 PS7220S Carbide Turning Inserts (Sangeo)
£5.50 exc. VAT10 pieces (Min. Order)
The DNMG150608 PS7220S series carbide turning inserts have a Rhombic 55° shape and a Negative insert geometry. The PS7220S chipbreaker is designed for Medium-Finishing applications and ideal for M10-M30 Stainless Steel / S10-S25 HRSA’s / K10-K20 Cast Iron / H05-H10 Hardened Steels. Sangeo’s range of turning inserts are made from a fine micrograin carbide substrate for excellent toughness and performance.
PS7220S excellent in medium speed machining of stainless steel. As adapting Salina coating which has excellent resistance for thermal & oxidation
PS7220S chipbreaker is the first choice chipbreaker for Negative geometry inserts for stainless steel, cast iron and exotics
- DNMG style Carbide Turning Inserts
- PS7220S Ultra-tough M35/S20 grade for medium to low-speed stainless steel and nickel alloy turning. Excellent for medium cutting to heavy roughing
- Negative Geometry
- TS chip breaker is the 1st choice for stainless steel and duplex continuous turning. Wide chip pockets for stable chip evacuation at a high depth of cuts and high feeds.
- Rhombic 55° Shape