Showing 1–24 of 142 results

1.5mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2015-050-04 (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 1.5
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius)

 

1.5mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3015-050-04 Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

10mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2100-075-10 (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius)

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-075-10 Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-075-10 Series (Sangeo)

The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius)

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-100-10 Long Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-100-10 Long Series (Sangeo)

The Sangeo DGA Long (100mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 40
L (Overall Length) 100
r (Radius)

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-150-10 Extra Long Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

10mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3100-150-10 Extra Long Series (Sangeo)

The Sangeo DGA Extra Long (150mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length)
L (Overall Length) 150
r (Radius)

10mm 3 Flute DLC Coated DXU U-Slot Mill Carbide End Mill – DXU3100-75-10 (Ageo)

The Ageo DXA series DLC coated carbide helix cutter has 3 flutes and a 20mm plain shank. These slot End Mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality Micrograin carbide, 55 HRC
  • Exclusive Ageo DLC-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
  • DLC Coated solid carbide
  • Long length
  • 3 Flute
  • Plain shank

10mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4100-075-10 (Sangeo)

The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality micrograin carbide.
  • Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Available on plain shanks.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius)

10mm 4 Flute PVD Coated DXF Mill Overall Length 100 Carbide End Mill – DXF4100-100-10 (Sangeo)

The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality micrograin carbide.
  • Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Available on plain shanks.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 100
r (Radius)

10mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R0.5 (Sangeo)

The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius) 0.5

 

10mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R1.0 (Sangeo)

The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius) 1.0

10mm x 2.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R2.0 (Sangeo)

The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
ØD (Cutting Dia.) 10
ØD (Shaft Dia.) 10
l (Flute Length) 25
L (Overall Length) 75
r (Radius) 2.0

11mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4110-075-12 (Sangeo)

The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality micrograin carbide.
  • Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Available on plain shanks.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
ØD (Cutting Dia.) 11
ØD (Shaft Dia.) 12
l (Flute Length) 25
L (Overall Length) 75
r (Radius)

12mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2120-075-12 (Sangeo)

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.

  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 12
ØD (Shaft Dia.) 12
l (Flute Length) 30
L (Overall Length) 75
r (Radius)

12mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3120-075-12 Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

12mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3120-075-12 Series (Sangeo)

The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 12
ØD (Shaft Dia.) 12
l (Flute Length) 30
L (Overall Length) 75
r (Radius)

 

12mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3120-100-12 Long Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

12mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3120-100-12 Long Series (Sangeo)

The Sangeo DGA Long (100mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 12
ØD (Shaft Dia.) 12
l (Flute Length) 45
L (Overall Length) 100
r (Radius)

12mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3120-150-12 Extra Long Series (Ageo)

The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide, 45 HRC
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank

12mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3120-150-12 Extra Long Series (Sangeo)

The Sangeo DGA Extra Long (150mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.

  • Micrograin carbide
  • Uncoated polished solid carbide
  • Polished high helix milling cutter for general aluminium and plastic machining
  • 45° Helix
  • Long length
  • 3 Flute
  • Plain shank
Operation General milling for aluminium and brass
ØD (Cutting Dia.) 12
ØD (Shaft Dia.) 12
l (Flute Length) 50
L (Overall Length) 150
r (Radius)

12mm 3 Flute DLC Coated DXU U-Slot Mill Carbide End Mill – DXU3120-75-12 (Ageo)

The Ageo DXA series DLC coated carbide helix cutter has 3 flutes and a 20mm plain shank. These slot End Mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.

  • High quality Micrograin carbide, 55 HRC
  • Exclusive Ageo DLC-Coating offers higher performance machining compared to standard TiALN coatings.
  • Wide range of geometries including various flute styles and ball nosed options.
  • Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
  • Consistent and reliable performance in general machining conditions on CNC machines.
  • DLC Coated solid carbide
  • Long length
  • 3 Flute
  • Plain shank