4 Flute Corner Radius End Mill – Alpha Tool Store https://www.alphatoolstore.com Best Quality Cutting Tools Sat, 12 Apr 2025 11:07:15 +0000 en hourly 1 https://www.alphatoolstore.com/wp-content/uploads/2021/06/cropped-Alpha-Tool-Store-icon-32x32.png 4 Flute Corner Radius End Mill – Alpha Tool Store https://www.alphatoolstore.com 32 32 20mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4200-100-20-R1.0 (Sangeo) https://www.alphatoolstore.com/product/20mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4200-100-20-r1-0-sangeo/ https://www.alphatoolstore.com/product/20mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4200-100-20-r1-0-sangeo/#respond Thu, 20 Jul 2023 14:20:10 +0000 https://www.alphatoolstore.com/?post_type=product&p=16379
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 20
    ØD (Shaft Dia.) 20
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 1.0
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 20
    ØD (Shaft Dia.) 20
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 1.0
    ]]>     https://www.alphatoolstore.com/product/20mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4200-100-20-r1-0-sangeo/feed/ 0     20mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4200-100-20-R0.5 (Sangeo) https://www.alphatoolstore.com/product/20mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4200-100-20-r0-5-sangeo/ https://www.alphatoolstore.com/product/20mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4200-100-20-r0-5-sangeo/#respond Thu, 20 Jul 2023 14:19:49 +0000 https://www.alphatoolstore.com/?post_type=product&p=16378
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 20
    ØD (Shaft Dia.) 20
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 0.5
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 20
    ØD (Shaft Dia.) 20
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 0.5
    ]]>     https://www.alphatoolstore.com/product/20mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4200-100-20-r0-5-sangeo/feed/ 0     18mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4180-100-18-R1.0 (Sangeo) https://www.alphatoolstore.com/product/18mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4180-100-18-r1-0-sangeo/ https://www.alphatoolstore.com/product/18mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4180-100-18-r1-0-sangeo/#respond Thu, 20 Jul 2023 14:19:27 +0000 https://www.alphatoolstore.com/?post_type=product&p=16377
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 18
    ØD (Shaft Dia.) 18
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 1.0
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 18
    ØD (Shaft Dia.) 18
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 1.0
    ]]>     https://www.alphatoolstore.com/product/18mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4180-100-18-r1-0-sangeo/feed/ 0     18mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4180-100-18-R0.5 (Sangeo) https://www.alphatoolstore.com/product/18mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4180-100-18-r0-5-sangeo/ https://www.alphatoolstore.com/product/18mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4180-100-18-r0-5-sangeo/#respond Thu, 20 Jul 2023 14:19:12 +0000 https://www.alphatoolstore.com/?post_type=product&p=16376
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 12
    ØD (Shaft Dia.) 12
    l (Flute Length) 30
    L (Overall Length) 75
    r (Radius) 1.0
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 18
    ØD (Shaft Dia.) 18
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 0.5
    ]]>     https://www.alphatoolstore.com/product/18mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4180-100-18-r0-5-sangeo/feed/ 0     16mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4160-100-16-R1.0 (Sangeo) https://www.alphatoolstore.com/product/16mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4160-100-16-r1-0-sangeo/ https://www.alphatoolstore.com/product/16mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4160-100-16-r1-0-sangeo/#respond Thu, 20 Jul 2023 14:19:00 +0000 https://www.alphatoolstore.com/?post_type=product&p=16375
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 16
    ØD (Shaft Dia.) 16
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 1.0
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 16
    ØD (Shaft Dia.) 16
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 1.0
    ]]>     https://www.alphatoolstore.com/product/16mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4160-100-16-r1-0-sangeo/feed/ 0     16mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4160-100-16-R0.5 (Sangeo) https://www.alphatoolstore.com/product/16mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4160-100-16-r0-5-sangeo/ https://www.alphatoolstore.com/product/16mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4160-100-16-r0-5-sangeo/#respond Thu, 20 Jul 2023 14:18:44 +0000 https://www.alphatoolstore.com/?post_type=product&p=16374
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 16
    ØD (Shaft Dia.) 16
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 0.5
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 16
    ØD (Shaft Dia.) 16
    l (Flute Length) 30
    L (Overall Length) 100
    r (Radius) 0.5
    ]]>     https://www.alphatoolstore.com/product/16mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4160-100-16-r0-5-sangeo/feed/ 0     14mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4140-080-14-R1.0 (Sangeo) https://www.alphatoolstore.com/product/14mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4140-080-14-r1-0-sangeo/ https://www.alphatoolstore.com/product/14mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4140-080-14-r1-0-sangeo/#respond Thu, 20 Jul 2023 14:18:24 +0000 https://www.alphatoolstore.com/?post_type=product&p=16373
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 14
    ØD (Shaft Dia.) 14
    l (Flute Length) 30
    L (Overall Length) 80
    r (Radius) 1.0
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 14
    ØD (Shaft Dia.) 14
    l (Flute Length) 30
    L (Overall Length) 80
    r (Radius) 1.0
    ]]>     https://www.alphatoolstore.com/product/14mm-x-1-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4140-080-14-r1-0-sangeo/feed/ 0     14mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4140-080-14-R0.5 (Sangeo) https://www.alphatoolstore.com/product/14mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4140-080-14-r0-5-sangeo/ https://www.alphatoolstore.com/product/14mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4140-080-14-r0-5-sangeo/#respond Thu, 20 Jul 2023 14:18:08 +0000 https://www.alphatoolstore.com/?post_type=product&p=16372
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 14
    ØD (Shaft Dia.) 14
    l (Flute Length) 30
    L (Overall Length) 80
    r (Radius) 0.5
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 14
    ØD (Shaft Dia.) 14
    l (Flute Length) 30
    L (Overall Length) 80
    r (Radius) 0.5
    ]]>     https://www.alphatoolstore.com/product/14mm-x-0-5mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4140-080-14-r0-5-sangeo/feed/ 0     12mm x 2.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4120-075-12-R2.0 (Sangeo) https://www.alphatoolstore.com/product/12mm-x-2-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4120-075-12-r2-0-sangeo/ https://www.alphatoolstore.com/product/12mm-x-2-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4120-075-12-r2-0-sangeo/#respond Thu, 20 Jul 2023 14:17:44 +0000 https://www.alphatoolstore.com/?post_type=product&p=16371
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 12
    ØD (Shaft Dia.) 12
    l (Flute Length) 30
    L (Overall Length) 75
    r (Radius) 2.0
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 12
    ØD (Shaft Dia.) 12
    l (Flute Length) 30
    L (Overall Length) 75
    r (Radius) 2.0
    ]]>     https://www.alphatoolstore.com/product/12mm-x-2-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4120-075-12-r2-0-sangeo/feed/ 0     10mm x 2.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4100-075-10-R2.0 (Sangeo) https://www.alphatoolstore.com/product/10mm-x-2-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4100-075-10-r2-0-sangeo/ https://www.alphatoolstore.com/product/10mm-x-2-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4100-075-10-r2-0-sangeo/#respond Thu, 20 Jul 2023 14:17:30 +0000 https://www.alphatoolstore.com/?post_type=product&p=16369
  • High quality micrograin carbide.
  • PVD coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Designed for milling of radius bottom slots, fillets and special contours.
    • ØD (Cutting Dia.) 10
    ØD (Shaft Dia.) 10
    l (Flute Length) 25
    L (Overall Length) 75
    r (Radius) 2.0
    ]]>     Product Information

    Features & Benefits

    The DXC series corner radius PVD Coated Carbide milling cutters have 4 flutes and a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 2mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXC
    TYPE Corner Radius
    Number of Flutes 4
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 10
    ØD (Shaft Dia.) 10
    l (Flute Length) 25
    L (Overall Length) 75
    r (Radius) 2.0
    ]]>     https://www.alphatoolstore.com/product/10mm-x-2-00mm-4-flute-coated-carbide-corner-radius-standard-length-end-mill-dxc4100-075-10-r2-0-sangeo/feed/ 0