2 Flute Ball Nose End Mill – Alpha Tool Store https://www.alphatoolstore.com Best Quality Cutting Tools Mon, 25 May 2026 16:44:59 +0000 en-US hourly 1 https://www.alphatoolstore.com/wp-content/uploads/2021/06/cropped-Alpha-Tool-Store-icon-32x32.png 2 Flute Ball Nose End Mill – Alpha Tool Store https://www.alphatoolstore.com 32 32 1.5mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2015-050-04 (Sangeo) https://www.alphatoolstore.com/product/1-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2015-050-04-sangeo/ https://www.alphatoolstore.com/product/1-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2015-050-04-sangeo/#respond Thu, 20 Jul 2023 13:40:55 +0000 https://www.alphatoolstore.com/?post_type=product&p=16332 The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm. The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 1.5
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius) -
 ]]> Product Information

Features & Benefits

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

Specification

Brand Sangeo
Product Range Carbide Endmills
Insert Designation DXB
TYPE Ball Nose
Number of Flutes 2
Surface Treatment Ultra fine substrate, PVD coating
Operation High cutting on hardened steel up to 55HrC
ØD (Cutting Dia.) 1.5
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius) –
]]> https://www.alphatoolstore.com/product/1-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2015-050-04-sangeo/feed/ 0 2mm 2 Flute 6mm Shank Coated Carbide Ball Nose Slot Drill – DXB2020-050-06 (Sangeo) https://www.alphatoolstore.com/product/2mm-2-flute-6mm-shank-coated-carbide-ball-nose-slot-drill-dxb2020-050-06-sangeo/ https://www.alphatoolstore.com/product/2mm-2-flute-6mm-shank-coated-carbide-ball-nose-slot-drill-dxb2020-050-06-sangeo/#respond Thu, 20 Jul 2023 13:40:15 +0000 https://www.alphatoolstore.com/?post_type=product&p=16333 The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm. The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 2
ØD (Shaft Dia.) 6
l (Flute Length) 6
L (Overall Length) 50
r (Radius) -
 ]]> Product Information

Features & Benefits

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

Specification

Brand Sangeo
Product Range Carbide Endmills
Insert Designation DXB
TYPE Ball Nose
Number of Flutes 2
Surface Treatment Ultra fine substrate, PVD coating
Operation High cutting on hardened steel up to 55HrC
ØD (Cutting Dia.) 2
ØD (Shaft Dia.) 6
l (Flute Length) 6
L (Overall Length) 50
r (Radius) –
]]> https://www.alphatoolstore.com/product/2mm-2-flute-6mm-shank-coated-carbide-ball-nose-slot-drill-dxb2020-050-06-sangeo/feed/ 0 2.5mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2025-050-04 (Sangeo) https://www.alphatoolstore.com/product/2-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2025-050-04-sangeo/ https://www.alphatoolstore.com/product/2-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2025-050-04-sangeo/#respond Thu, 20 Jul 2023 13:40:00 +0000 https://www.alphatoolstore.com/?post_type=product&p=16334 The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm. The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
ØD (Cutting Dia.) 2.5
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius) -
 ]]> Product Information

Features & Benefits

The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

Specification

Brand Sangeo
Product Range Carbide Endmills
Insert Designation DXB
TYPE Ball Nose
Number of Flutes 2
Surface Treatment Ultra fine substrate, PVD coating
Operation High cutting on hardened steel up to 55HrC
ØD (Cutting Dia.) 2.5
ØD (Shaft Dia.) 4
l (Flute Length) 6
L (Overall Length) 50
r (Radius) –
]]> https://www.alphatoolstore.com/product/2-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2025-050-04-sangeo/feed/ 0 3.5mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2035-050-04 (Sangeo) https://www.alphatoolstore.com/product/3-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2035-050-04-sangeo/ https://www.alphatoolstore.com/product/3-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2035-050-04-sangeo/#respond Thu, 20 Jul 2023 13:39:46 +0000 https://www.alphatoolstore.com/?post_type=product&p=16335
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
    • ØD (Cutting Dia.) 3.5
    ØD (Shaft Dia.) 4
    l (Flute Length) 8
    L (Overall Length) 50
    r (Radius) -
    ]]>     Product Information

    Features & Benefits

    The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXB
    TYPE Ball Nose
    Number of Flutes 2
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 3.5
    ØD (Shaft Dia.) 4
    l (Flute Length) 8
    L (Overall Length) 50
    r (Radius) –
    ]]>     https://www.alphatoolstore.com/product/3-5mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2035-050-04-sangeo/feed/ 0     9mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2090-075-10 (Sangeo) https://www.alphatoolstore.com/product/9mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2090-075-10-sangeo/ https://www.alphatoolstore.com/product/9mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2090-075-10-sangeo/#respond Thu, 20 Jul 2023 13:37:15 +0000 https://www.alphatoolstore.com/?post_type=product&p=16336
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
    • ØD (Cutting Dia.) 9
    ØD (Shaft Dia.) 10
    l (Flute Length) 20
    L (Overall Length) 75
    r (Radius) -
    ]]>     Product Information

    Features & Benefits

    The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXB
    TYPE Ball Nose
    Number of Flutes 2
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 9
    ØD (Shaft Dia.) 10
    l (Flute Length) 20
    L (Overall Length) 75
    r (Radius) –
    ]]>     https://www.alphatoolstore.com/product/9mm-2-flute-coated-carbide-ball-nose-slot-drill-dxb2090-075-10-sangeo/feed/ 0     20mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2200-100-20 (Sangeo) https://www.alphatoolstore.com/product/20-mm-hrc55-ball-nose-carbide-endmill-dxb2200-100-20/ https://www.alphatoolstore.com/product/20-mm-hrc55-ball-nose-carbide-endmill-dxb2200-100-20/#respond Sun, 27 Jun 2021 15:17:26 +0000 https://www.alphatoolstore.com/?post_type=product&p=12299
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
    • ØD (Cutting Dia.) 20
    ØD (Shaft Dia.) 20
    l (Flute Length) 45
    L (Overall Length) 100
    r (Radius) -
    ]]>     Product Information

    Features & Benefits

    The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXB
    TYPE Ball Nose
    Number of Flutes 2
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 20
    ØD (Shaft Dia.) 20
    l (Flute Length) 45
    L (Overall Length) 100
    r (Radius) –
    ]]>     https://www.alphatoolstore.com/product/20-mm-hrc55-ball-nose-carbide-endmill-dxb2200-100-20/feed/ 0     18mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2180-100-18 (Sangeo) https://www.alphatoolstore.com/product/18-mm-hrc55-ball-nose-carbide-endmill-dxb2180-100-18/ https://www.alphatoolstore.com/product/18-mm-hrc55-ball-nose-carbide-endmill-dxb2180-100-18/#respond Sun, 27 Jun 2021 15:16:33 +0000 https://www.alphatoolstore.com/?post_type=product&p=12297
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
    • ØD (Cutting Dia.) 18
    ØD (Shaft Dia.) 18
    l (Flute Length) 45
    L (Overall Length) 100
    r (Radius) -
    ]]>     Product Information

    Features & Benefits

    The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXB
    TYPE Ball Nose
    Number of Flutes 2
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 18
    ØD (Shaft Dia.) 18
    l (Flute Length) 45
    L (Overall Length) 100
    r (Radius) –
    ]]>     https://www.alphatoolstore.com/product/18-mm-hrc55-ball-nose-carbide-endmill-dxb2180-100-18/feed/ 0     16mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2160-100-16 (Sangeo) https://www.alphatoolstore.com/product/16-mm-hrc55-ball-nose-carbide-endmill-dxb2160-100-16/ https://www.alphatoolstore.com/product/16-mm-hrc55-ball-nose-carbide-endmill-dxb2160-100-16/#respond Sun, 27 Jun 2021 15:15:58 +0000 https://www.alphatoolstore.com/?post_type=product&p=12295 The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm. The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
    • High quality micrograin carbide.
    • PVD Coating with high heat and wear resistance across a wide range of metals.
    • Dry cutting on steels can increase tool life up to 50%
    • Consistent and reliable performance in general machining conditions.
    • Ball nosed with short flutes.
    • Designed for milling of radius bottom slots, fillets and special contours
    ØD (Cutting Dia.) 16
    ØD (Shaft Dia.) 16
    l (Flute Length) 45
    L (Overall Length) 100
    r (Radius) -
    ]]>     Product Information

    Features & Benefits

    The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXB
    TYPE Ball Nose
    Number of Flutes 2
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 16
    ØD (Shaft Dia.) 16
    l (Flute Length) 45
    L (Overall Length) 100
    r (Radius) –
    ]]>     https://www.alphatoolstore.com/product/16-mm-hrc55-ball-nose-carbide-endmill-dxb2160-100-16/feed/ 0     14mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2140-100-14 (Sangeo) https://www.alphatoolstore.com/product/14-mm-hrc55-ball-nose-carbide-endmill-dxb2140-100-14/ https://www.alphatoolstore.com/product/14-mm-hrc55-ball-nose-carbide-endmill-dxb2140-100-14/#respond Sun, 27 Jun 2021 15:15:11 +0000 https://www.alphatoolstore.com/?post_type=product&p=12293
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
    • ØD (Cutting Dia.) 14
    ØD (Shaft Dia.) 14
    l (Flute Length) 50
    L (Overall Length) 100
    r (Radius) -
    ]]>     Product Information

    Features & Benefits

    The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXB
    TYPE Ball Nose
    Number of Flutes 2
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 14
    ØD (Shaft Dia.) 14
    l (Flute Length) 50
    L (Overall Length) 100
    r (Radius) –
    ]]>     https://www.alphatoolstore.com/product/14-mm-hrc55-ball-nose-carbide-endmill-dxb2140-100-14/feed/ 0     12mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2120-075-12 (Sangeo) https://www.alphatoolstore.com/product/12-mm-hrc55-ball-nose-carbide-endmill-dxb2120-075-12/ https://www.alphatoolstore.com/product/12-mm-hrc55-ball-nose-carbide-endmill-dxb2120-075-12/#respond Sun, 27 Jun 2021 15:13:38 +0000 https://www.alphatoolstore.com/?post_type=product&p=12291
  • High quality micrograin carbide.
  • PVD Coating with high heat and wear resistance across a wide range of metals.
  • Dry cutting on steels can increase tool life up to 50%
  • Consistent and reliable performance in general machining conditions.
  • Ball nosed with short flutes.
  • Designed for milling of radius bottom slots, fillets and special contours
    • ØD (Cutting Dia.) 12
    ØD (Shaft Dia.) 12
    l (Flute Length) 30
    L (Overall Length) 75
    r (Radius) -
    ]]>     Product Information

    Features & Benefits

    The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes.  These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.

    Specification

    Brand Sangeo
    Product Range Carbide Endmills
    Insert Designation DXB
    TYPE Ball Nose
    Number of Flutes 2
    Surface Treatment Ultra fine substrate, PVD coating
    Operation High cutting on hardened steel up to 55HrC
    ØD (Cutting Dia.) 12
    ØD (Shaft Dia.) 12
    l (Flute Length) 30
    L (Overall Length) 75
    r (Radius) –
    ]]>     https://www.alphatoolstore.com/product/12-mm-hrc55-ball-nose-carbide-endmill-dxb2120-075-12/feed/ 0